Tank leak test in a test time of 35 seconds and up to a measuring accuracy of 10 to the power of -7.
Flexible optical measuring and testing system, flexible with camera and/or laser measuring sensor
Fitting PDC and PLA sensors to bumpers
Brushing unit for circumferential brushing of Webasto evaporator mounts.
Control or monitor your machines, record data or perform system maintenance from anywhere in the world via the internet using a PC, smartphone or tablet.
A wide variety of components are tested and/or packed.
Two types of turbochargers are machined, cleaned, lasered with DMC, pin mounted, screwed in and leak tested.
Pump parts are placed in a rotary indexing table, checked on both sides for dimensional accuracy and quality, and then packed in the correct position in tubes.
A foam bead with a length of approx. 2 m is measured in height and width within eight seconds.
Screws in the part spectrum from M6 to M24 and a length of 150 mm are 100% final tested.
Battery terminals are checked for quality all around by means of a 2D laser contour scanner. The inspection time is less than ten seconds.
An approximately 22 mm long sintered sliding wedge is tested and measured on a conveyor belt in the contour to 0.03 mm and on the surfaces in the range 0.05 mm.
Fully automatic plugging of clamp to instrument panels.
Easy data processing and creation of reports in Excel.The current status of the plant and the production process can be clearly visualised.
Solder joints, SMD components and conductor tracks are checked for highest quality